• Step One:  Separate hair.  Using a comb, part hair horizontally from one side of the head to the other.  Starting about one inch above the ears, part hair around the back of the head just below the crown.  Lift all hair above the part and clip it out of the way.
• Step Two:  Placement of first clip.  Back comb along part to make hair easier for clip to attach to.  Snap open all the clips on hair piece.  The top middle clip (1) should be attached first by placing it at the middle back of the head just below the part so the top of the weft is even with the part when attached.  Moving the clip downward, catch hair and snap clip closed.  Second and third clips:  Next, attach left top clip (2) toward front left temple.  Hold down center clip with your right hand, use your left hand to move the left edge of the weft as far as it will go around your head.  Snap left clip shut.  Holding the middle clip with your left hand, now attach the top right clip (3) in the same manner.  Check for gaps along hairpiece by running your fingers along the top weft to make sure it lies flat against your head.  If you find a gap, open clip and re-position.  Remaining clips:  The bottom right clip (4) is next.  Attach bottom clips in a comfortable position in same manner as 1, 2 and 3 where they lay against your hair.  If you feel any discomfort, un-clip re-position and re-clip.  Repeat on the left bottom clip (5).  Next attach the right side clip.  Clip 6 and 7 (individual 1 inch clip in pieces) are used to fill in area between hair line at side of face and temple for more volume and fullness, to be placed where needed and/or most comfortable.

Completion:  Hair may be straightened and re-curled with a 320 degree flat iron and 320 degree curling iron or hot rollers.  Let hair cool on curling iron or hot rollers before removing for best curl results.  Allow hair to cool in new shape 30 to 40 seconds before removing heat appliance.  Cool in the new shape.  Hair will keep its new look for as long as you like or until you re-style with heat.

Removal:  To remove the piece, snap open all clips.  Gently lift hairpiece up and away from your hair.

Cleansing the Extensions:  Gently comb hairpiece to remove tangles.  When washing memory clip in extension hair, fill sink with enough cool water - never hot - to cover the piece.  Use one to two teaspoons of gentle daily shampoo for every two quarts of water.  Gently swish piece in sink.  Rinse thoroughly in cold water.  Gently pat out excess water in a towel.  Do not twist or wring.  Lay piece flat to thoroughly dry at room temperature.  Do not put hairpiece on a solid wig head or block while wet as it may stretch the cap.  Style only when completely dry.