How to get great results with Smile Whitening Light System's fast and easy two step process:

Step 1:

• Brush your teeth, and then use a tissue to blot the surface of teeth dry.
• Remove the ampoule from paper sleeve, slip it over and reinsert with applicator tip pointing outwards.
• With applicator tip pointing down, squeeze until the inner tube pops and tip is saturated with serum.
• Apply to each tooth's surface, in a circular motion. Squeeze and apply until empty. Continue to squeeze the ampoule to move the serum out through the tip as you go!

Step 2:

• Turn the light on by pressing the "G" button at the center.
• Position device in mouth with lips around mouth piece and light in front of teeth, hold the device perpendicular in your mouth, and your head upright, Keep device in place until timer beeps (about 10 minutes).
• After the device beeps, immediately repeat steps 1 and 2 two more times, for a total of 3 10-minute passes of ampoule plus light. Allow just over 30 minutes to complete the entire whitening process.

For best results:

• Wait at least 20 minutes before eating and drinking.
• Make sure light is activated; do not look directly into light source.
• Rest upper teeth on lower teeth without overlapping to make sure all surfaces are exposed to the light.
• It is safe to swallow any excess saliva as you use the light device, but you
  may wish to spit between whitening cycles.
• Use Smile Whitening Light once every 2 weeks for optimal whitening
  results.
• Make sure tip of the ampoule is completely saturated before use.
• You can purchase Whitening Ampoule Refill to continue using the light device at Beauty.com